How to Program Spectrum Remote 1060BC2/1060BC3 to TV with Codes in just 6 steps.
Program Spectrum Remote 1060BC2/1060BC3 to TV with Codes

How to Program Spectrum Remote 1060BC2/1060BC3 to TV with Codes in just 6 steps.

The article explains how to program Spectrum Remote 1060BC2/1060BC3 to TV with Codes. Let’s learn how! 

You will be given a user manual and instructions on how to program the Spectrum Remote to your television and other devices. If you do not know the model number of the remote, you can carefully remove the back cover and find it printed on the inside. Once you have found it, you can begin the Spectrum Remote setup process.

As you proceed through Spectrum Remote programming, the Spectrum Guide quickly detects the brand of your TV set. With simple push commands, you can monitor and control your audio and video devices. You may want to read through the Spectrum Remote Setup steps to complete your task if your TV brand is not identified or if you like to do everything yourself.

How to program Spectrum Remote 1060BC2/1060BC3 to TV with Codes.

Programming Spectrum Remote 1060BC2/1060BC3 to TV with Codes.
Using Spectrum Remote shows for models 1060BC2/1060BC3 is straightforward. You can operate the Spectrum cable box, Pioneer audio receiver, Toshiba DVD player, and RCA TV with the Spectrum 1060BC3 Remote Control.

1.

The first step is to identify the TV’s five-digit programming code. The table below shows where you can find the code that you are looking for.

Dynex: 11463, 11780, 11785, 11810, 12049, 12184
Insignia: 11423, 11564, 10171, 11204, 11517, 11641, 11660, 11710, 11780, 11892, 11963, 12002, 12049, 12088, 12417
LG: 11423, 10017, 11265, 10178, 10700, 10856, 11178, 11768, 11993, 12358, 12424
Magnavox: 11454, 11866, 10054, 10051, 10706, 10802, 11198, 11254, 11365, 11856, 11944, 11963, 11990, 12372
Panasonic: 10250, 11480, 11457, 10051, 10650, 11271, 11291, 11410, 11941, 11946
Philips: 11454, 11866, 10054, 10690, 11154, 11744, 11806, 11856, 11867, 12372, 12374
RCA: 11547, 10178, 11447, 10047, 10051, 10093, 10679, 11047, 11147, 11247, 11347, 11781, 11948, 11953, 11958, 12002, 12187, 12247, 12434
Samsung: 10812, 10060, 10702, 10178, 10650, 10766, 10814, 11060, 11903, 12051
Sharp: 10818, 10093, 10688, 10851, 11602, 11756, 12360
Sony: 10000, 10810, 10834, 11317, 11685
TCL: 11756
Toshiba: 11524, 10156, 11256, 11265, 10060, 10650, 10822, 10832, 10845, 11156, 11356, 11656, 11704, 11935, 11945, 12006
Vizio: 11758, 10864, 10885, 11756
Zenith: 10000, 11423, 10047, 10017, 10463, 11265, 10178, 11145, 10145, 11661

2.

Next, simply press the device key on the remote control that says “TELEVISION”.

3.

When the chosen mode key blinks twice, press and hold SETUP.

4.

After that, you will need to type in the 5-digit code for your gadget as noted in the above table. When the chosen mode secret blinks twice, you will see it.

5.

Afterward, you can repeat steps 3-5 and enter the particular code again if the mode essential blinks long.

6.

Press the Power/Play key when the remote control is pointing at the TV. There should be an off switch on the TV. In order to find the code that works, go through steps 2-5 again so you can figure out what else you need to do. Attempt troubleshooting if it still doesn’t work.

The article explained the process of Programming Spectrum Remote 1060BC2/1060BC3 to TV with Codes in just 6 simple steps.

Troubleshooting

If the TV still doesn’t respond to the remote control, you can try these troubleshooting tips.

  • You can scroll back through codes slowly by pressing and releasing the CH1 key.
  • Simply press the TV key on your remote control once. Press the TV key two times, but don’t release it until the SETUP key blinks.
  • After entering the numbers 9 9 1 twice, let the TV key blink twice again.
  • Once you’ve pressed the number key, hit 1. Two more blinks will occur on the TV button.
  • Press the POWER key one time with your Spectrum remote while facing the TV.
  • Repeat pressing and releasing the CH key again and again. Turn off the TV when it has finished.
  • You can now turn on the TV by pressing the POWER key, followed by the SETUP key to lock in the code.

The programming changes a bit for every spectrum remote.

Read the following article to know:

Santosh Thota

A digital marketer by profession, explorer by nature, and all-time nerd. His love for writing brings him to this blog. The journey hasn’t been long for him as of now, but with his current interest and dedication, he thrives to write more. Santosh also writes content for many other different websites.

Leave a Reply